Schutte 425801 Thermostatic Bath Shower Mixer Tap Vico Chrome

Online Only - Free Delivery

The premium, user-friendly thermostatic bath shower mixer tap VICO from SCH?TTE is a perfect choice for every bathroom.

The bathroom mixer tap is distinguished by a replaceable thermostat element and temperature scale with child-protection at 38 ??C. Thanks to its chrome-plated surface, this mixer tap has a reflective sheen. Moreover, the solid brass construction makes the bathroom tap highly durable.

The mixer tap is easy to install and clean.

• Colour: Chrome
• Material: Brass
• Finish: Chrome plated
• Dimensions: 25.2 x 7.2 x 3 cm (L x W x H)
• Replaceable thermostat element
• ?"(diameter approx. 1.9 cm) ceramic valve bonnets and shower hose connection
• Temperature scale with child-protection at 38 ?C

Safety notes . Only allow experts carry out the installation work. . CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off. . Ensure that all gaskets have the correct fit. . These taps are not suitable for use on low pressure and small electrical storage heaters. . We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the upper parts of the valves. . This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0?C, when there is danger of frost, sut off the water supply and empty the tap. . If the tap not used for a longer period, we recommend to initially let a larger quantity of water flow through before withdrawing drinking water. ? Take care when adjusting the warm water. Danger of scalding! . Incorrectly installed fittings can cause water damages! ? Despite careful production, sharp edges can occur. Please exercise caution!Disposal Your washbasin tap is delivered in a solid pa- ckaging, in order to protect it against transport damages. The packaging consists of recyclable materials. Dispose it in an environmentally suitable manner. Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal administration about the possibility of an environmentally friendly disposal. Technical data . Flow pressure: recommended 1.5 bar; install a pressure reducer at more than 6 bar . Water temperature: max. 80  ? Water connection: warm - left / cold - rightA Installation Instructions . Shut off the water supply before beginning installation ? After installation unscrew the mixer nozzle, flush the pipeline and the tap very well (warm/cold water supply), in order to flush out contaminations (swarf and hemp remain- ders). After flushing, screw the mixing nozzle onto the spout again. . We do not assume any warranty for in correct installation - in particular for subsequent damages! . Check all connections carefully after first-time use to make sure that they are tight.Instructions for care Sanitary taps require special care. Therefore, please observe the following instructions: ? Chrome-plated surfaces are sensitive to lime- dissolving agents, acidic cleaning agents and all kinds of abrasives. . Never clean coloured surfaces with abrasive, corrosive, or alcoholic agents. . Only clean your taps with clear water and a soft cloth or a shammy. Surface damage is to be expected, if the care instructions are not observed. This makes any warranty claims invalid. Do not forget to unscrew the mixing nozzle in regular intervals and to remove possibly calcareous residues or foreign matter. It is advisable to replace the mixing nozzle with a new one in the case of extreme contamination.Maintenance . Please note that a valve top is a wearing part and that in the case of very hard or soiled water the valve must be replaced every 1 to 2 years, as required. Please purchase spare parts from your local retailer. . Please check all joints and connections for leaks or visible damages at regular intervals. . In case of any leaks or visible damages to the fitting or connection hoses, these should be immediately checked by a specialist and replaced if necessary. Decommissioning . Cut off the water supply before dismantling the product. . Pay attention to escaping residual water. . Disassemble the product in the reverse order of the assembly instructions.1 The illustrations are to be considered as figurative representations, deviations of the product are possible. Subject to technical modifications. GUARANTEE CARD The Franz Joseph Sch??tte GmbH grants a manufacturer guarantee for the tap you have acquired according to the following guarantee conditions. This guarantee does not limit your warranty claims resulting from the sales con- tract with the vendor as well as your statutory rights. Guarantee conditions: 1. Scope of the guarantee The Franz Joseph Sch??tte GmbH guarantees for perfect, material condition and processing suitable for the intended purpose, professional assembly, leaktightness, and function. The guarantee does not cover: . Corrosion in the mixing nozzles (aerator) ?? Valves ?? Damage by inappropriate installation, start- up and handling ?? Damage by outside effects, such as fire, water, abnormal environmental conditions. Mechanical damage by accident, fall, impact . Negligent or intentional destruction . Normal wear or malfunctions due to lack of maintenance .